Field Service Ver3.0 Nov.2006
11.1.3
Pick-up roller load adjustment
In case a no feed jam occurs frequently, perform the pick-up roller load adjustment.
[2]
[4]
[1]
[3]
[4]
1050fs3030c
11. MECHANICAL ADJUSTMENT
1.
Pull out the paper feed tray.
2.
In the pick-up roller section [1], put paper feed
assist plate [3] on the paper feed assist plate
holder [2], and fix them with accompanying screw
(M3 x 8 mm) [4].
3.
Set the tray.
4.
Perform copying/printing to check whether the no
feed or the double feed occurs or not.
Note
• The maximum number of the paper feed
assist plates that can be attached is 4 plates.
For the number of plates to be attached, see
chapter V "5. Paper setting."
• The paper feed assist plate is approx. 10g
each.
501