Field Service Ver3.0 Nov.2006
10.11.6 Mail address setting
A. Procedure for setting the main body NIC
Display the Web utility on the browser of the PC that
is connected to this machine by the network to set
the mail address. The mail setting method of the CS
Remote Care that uses the main body NIC is the
same as that for the mail remote notification system.
Corresponding browser: Internet Explorer 5.5 or
Netscape4.7x or above
1.
Start up the PC that is connected to this
machine by the network.
2.
Open the browser and select "Open" in the file
menu.
3.
Enter the IP address of this machine or the host
name, and press the [Enter] key. The main page
of the Web utility screen of this machine is dis-
played.
4.
Click [Extension for maintenance].
Enter "ce" for the user name and then enter the
8-digit CE password (default: 92729272) for
the password, and then click the [OK] button.
The CE extended function screen is displayed.
5.
Click [E-Mail Initial Setting]. The mail initial set-
ting screen is displayed.
10. SERVICE MODE
463