Konica Minolta bizhub PRO 1050 Service Manual page 90

3. PERIODIC CHECK
[4]
[3]
[5]
[2]
58
1
6.
[2]
[1]
7.
NOTE
• Any used developer remaining in the develop-
[3]
1050fs2114c
8.
9.
[4]
10.
[1] 11.
12.
[6]
1050fs2115c
Field Service Ver3.0 Nov.2006
With the developing unit [1] tilted to about 45°
[2], rotate the developing gear to the arrow-
marked direction [3] with a flat blade screwdriver
to discharge the developer [4] in the developing
unit thoroughly.
Use cleaner to clean the developer adhered to
the developing roller.
ing roller may cause gray background to the
image.
Pour new developer [1] evenly from above the
mixing screw [2].
Rotate the developing gear [5] counterclockwise
so that the developer gets fully into the develop-
ing unit [4].
Repeat the steps 8 and 9 to pour the developer
completely.
Rotate the developing gear counterclockwise
and check the height of developer across the
entire developing roller [6].
Reinstall the above parts following the removal
steps in reverse.