Konica Minolta bizhub PRO 1050 Service Manual page 252

5. FIRMWARE VERSION UP
"OK": Accord
"NG": Not accord
"??": A corresponding checksum not found
[7] File Send key
• The transmission of the transferred files is started.
[8] Send file information frame
• A list of files actually transferred is displayed based on the information selected in the frames [1] and [10], and
pressing the [File Check] key displays the checksum of files and the consistency of the checksum (OK, NG,
??).
[9] File detailed information list
• When the version file of [3] is selected, the detailed information of a file are displayed.
[10] Condition selection frame
• The condition of the transferred file (rewritten data) is checked. When all the 4 types of combo boxes are
selected, the folder of [2] is set based on the information set in the INI file. The contents of the combo box
selected is stored in the ISWTrns.INI file by "Transmission," and initialized and displayed when being started
next time.
(2) Rewrite procedure
Ex.: When the image control program is written collectively.
Step
1 Copy the data to the PC. (For the procedure, see "C. Firmware copy.")
2 Start the ISWTrns program.
3 Select the machine type, the destination and the board types.
• Machine type: bizhub 1050, Destination: KBJ, Board type: 11 to 14 collectively
4 The data to be used is displayed in the version file selection box and the transmitted file information
frame.
5 Press the [File Check] key to check if the data to be used has any problem.
220
Operations
Field Service Ver3.0 Nov.2006