Developing Unit - Konica Minolta bizhub PRO 1050 Service Manual

6. OTHERS
6.1.4

Developing unit

(1) Positions from which the screws are not allowed to be removed
• 2 fixing screws of the developer regulation blade
• 1 fixing screw of the magnet angle adjusting knob
[1] Screws not allowed to be removed
[2] Screws not allowed to be removed
[3] Magnet angle adjusting knob
(2) Reason of prohibition
The developer regulation blade and the magnet angle adjusting knob both decide the heights of the developer in
the developing roller. They have been adjusted to an appropriate value in advance. Accordingly these fixing
screws are not allowed to be removed.
244
[5]
[4]
[1]
[3] [2]
[4] Developing roller
[5] Developer regulation blade
Field Service Ver3.0 Nov.2006
1050fs2221c