Main Body (Write Position Adjusting Shaft) - Konica Minolta bizhub PRO 1050 Service Manual

6. OTHERS
6.1.6

Main body (write position adjusting shaft)

(1) Positions from which the screws are not allowed to be removed
• 2 attaching screws of the write position adjusting shaft fixing plate
[1] Screws not allowed to be removed
[2] Write position adjusting shaft fixing plate
(2) Reason of prohibition
The write position adjusting shaft is the reference angle of the installation of the write section to the drum.
Removing it may undermine the parallelism of the drum with the write section, thus causing the image to be
deformed. Therefore, be sure not to remove the attaching screw of the fixing plate of the write position adjusting
shaft.
248
[3] [2]
[3] Write position adjusting shaft
Field Service Ver3.0 Nov.2006
[1]
1050fs2224c