Konica Minolta bizhub PRO 1050 Service Manual page 114

3. PERIODIC CHECK
[4] [5]
[2]
[1]
82
2
[3] [2] [1]
1050fs2424d
[1]
1050fs2425d
[2] [3]
1050fs2426d
Field Service Ver3.0 Nov.2006
8. Remove the E-ring [2] from the toner guide shaft
[1], and remove the cleaning gear /B [3].
NOTE
• While removing the cleaning gear /A assembly
or the cleaning gear/B [3], the bearing [4] and
the splash prevention felt [5] may come off. If
the felt become detached, make sure to
replace it with a new one.
9. Remove the E-ring [2] from the toner guide shaft
[1].
10.
Remove the C-clip [1] and remove the bearing
[2].
11.
Pull out the toner guide shaft [3] to remove it.