Pcs Corresponding Parts; Pcs Corresponding Parts List - Konica Minolta bizhub PRO 1050 Service Manual

6. OTHERS
6.5

PCS corresponding parts

6.5.1 PCS corresponding parts
"PCS" stands for "proactive customization support," and three types of items are set so that the demands
expected in the POD market and Product printing market can be met. Providing these parts allows customiza-
tion adequate to the user's type of usage.
6.5.2

PCS corresponding parts list

A. Transfer assist sheet
(1) Purpose
For the transfer assist sheet, A3 and A4 sizes (metric)/11 inches size (inch) are provided as standard equipment.
When paper sizes other than the standard sizes are used more frequently, the transfer assist sheet can be
changed to these sizes.
(2) Characteristics
8 types of the transfer assist sheets are provided according to the paper sizes. However, when changing to
sizes other than those provided as standard equipment, it is necessary to add a new relay wiring harness and
size detection connector.
It is possible to use a number of the transfer/separation assist sheets. On that occasion, however, after adding
the relay wiring harness mentioned above, it is necessary to purchase a transfer assist sheet that has been
incorporated into the transfer/separation charger unit. This transfer/separation charger unit must be provide with
a size detection connector.
NOTE
• When using plural sizes jointly, the transfer/separation unit of standard equipment (A3 and A4/
metric, 11 inches) requires the size detection connector.
• Since no individual counter is equipped, when the unit is replaced for each size, the management
of the counter is unavailable.
(3) Counter management of the transfer/separation unit in the PCS correspondence
The copy count (fixed parts count) by parts that need to be replaced is equipped with a counter for each size.
When making the transfer/separation charger unit PCS corresponding, be sure to conduct the counter manage-
ment with this counter. However, this counter counts any relevant size regardless of the size of the transfer assist
sheet installed to the main body. So, to manage the counter correctly, the user must replace the transfer/separa-
tion charger unit with an appropriate one.
• Reference:
Double sided print job on the following condition
Transfer size: 8.5 inches
2
Weight: 91 g/m or less
No. of prints: 10
Size of the transfer assist sheet: A4S, A5
The copy count by parts that need to be replaced on this condition is as shown below. On this occasion, even if
the transfer assist sheet size is A4S or A5, the transfer size is "8.5 inches" and the count is up at 8.5 inches
No. 107 8.5 inches. double sided paper through count 10 counts
No. 108 A4S, A5 double sided paper through count
304
Field Service Ver3.0 Nov.2006
0 count