Konica Minolta bizhub PRO 1050 Service Manual page 298

6. OTHERS
D. Stretching of the scanner wire
NOTE
• Be sure to wind the wire closely without overlapping each other.
• When re-stretching or replacing the scanner wire, be sure to use the optics unit positioning jig.
• When re-stretching or replacing the scanner wire, be sure to conduct the image adjustment in the
service mode.(See P.317)
(1) Procedure
[3]
1.
Remove the upper cover /Rt.
2.
Remove the original glass.
3. Remove the upper cover /Lt.
4.
Remove the upper cover /Fr.
5.
Move the exposure unit.
6. Move the V-mirror unit [1] toward the V-mirror positioning hole [2].
7.
Insert the optics unit positioning jig [3] into the V-mirror positioning hole [2] and fix the V-mirror unit [1].
NOTE
• Be sure to insert the optics unit positioning jig [3] from the front side and pass it through the V-mir-
ror unit [1].
• Be care full not to confuse the V-mirror positioning hole [2] with the unused hole [4].
266
[1]
(See P.256)
(See P.256)
(See P.257)
(See P.257)
(See P.264)
Field Service Ver3.0 Nov.2006
[2]
[4]
[3]
[3]
1050fs2226c