Konica Minolta bizhub PRO 1050 Service Manual page 181

Field Service Ver3.0 Nov.2006
P. Replacing the fusing exit roller
(1) Periodically replaced parts/cycle
• Fusing exit roller: Every 6,000,000 prints
(2) Procedure
[1]
1.
2.
[2]
1050fs2786c
Open the front doors /Rt and /Lt, and pull out the
ADU from the main body. (See P.112)
Loosen 3 screws [1] and remove the reverse sec-
tion cover [2].
3. PERIODIC CHECK
149