KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
9.22 LCT skew adjustment
Perform the LCT skew adjustment when the paper
skew is different with paper supplied from the other
tray in such case as LCT is placed on the inclined
surface. However, it has just a little effect because
all paper is corrected at the second paper feed sec-
tion.
A. When all printouts are skewed:
1. Print the test pattern No.16 in the continuous
copy mode to check the skew amount.
2. Open the front door of the LCT.
3. Loosen 2 screws [2] for the positioning bracket
[1] at the bottom of the LCT.
4. Adjust the position of the positioning bracket [2].
5. Tighten the 2 screws [2].
[1]
1-181
OTHER ADJUSTMENTS
[2]
8050fs1066