Konica Minolta bizhub PRO 1050 Service Manual page 585

13. JAM CODE
Classifi- Jam
cation code
SD J73-12
J73-13
J73-14
J73-15
LS J73-17
J73-18
J73-19
J73-20
J73-21
J73-22
550
1
Cause
Either of the right angle conveyance
sensor /1 (PS5) or the right angle con-
veyance sensor /2 (PS6) turns ON while
in idling.
Either of the folding sensor /1 (PS7), the
folding passage sensor (PS8), the tri-
folding exit sensor, or the folding sensor
/2 (PS44) turns ON while in idling.
The saddle stitching paper sensor
(PS13) turns ON while in idling.
Either of the bundle sensor /1 (PS14),
the bundle sensor /2 (PS15), the bundle
sensor /4 (PS54), or the bundle exit
sensor /2 (PS57) turns ON while in
idling.
The entrance sensor (PS4) of the tan-
dem (1st) LS turns ON while in idling.
The sub tray exit sensor (PS10) of the
tandem (1st) LS turns ON while in idling.
Either of the conveyance sensors /1, /2
and /3 (PS7, 16 and 17) of the tandem
(1st) LS turns ON while in idling.
The coupling exit sensor (PS18) of the
tandem (1st) LS turns ON while in idling.
The entrance sensor (PS4) of the tan-
dem (2nd) LS turns ON while in idling.
The sub tray paper exit sensor (PS10)
of the tandem (2nd) LS turns ON while
in idling.
Field Service Ver3.0 Nov.2006
Resulting
operation
— Open the SD front door /
Rt and remove jammed
paper, if any.
Open the SD front door /
Lt and remove jammed
paper, if any.
Open the tandem (1st)
LS front door, open then
entrance conveyance
jam release lever and
remove jammed paper, if
any.
Open the tandem (1st)
LS sub tray cover, and
remove jammed paper, if
any.
Open the tandem (1st)
LS JAM door, and
remove jammed paper, if
any.
Open the tandem (1st)
LS front door, open then
the coupling exit jam
release lever, and
remove jammed paper, if
any.
Open the tandem (2nd)
LS front door, open then
entrance conveyance
jam release lever and
remove jammed paper, if
any.
Open the tandem (2nd)
LS sub tray cover, and
remove jammed paper, if
any.
Correction