Konica Minolta bizhub PRO 1050 Service Manual page 529

10. SERVICE MODE
10. "Clamp FD Position Adj. screen"
Enter a value through the numeric keys and
press the [Set] key.
• Setting range:-20 (wider) to +20 (narrower)
1 step = 0.1mm
11.
Repeat the steps 5 to 10 until an appropriate
value is obtained.
Note
• If the setting is too wide, pages are mis-
placed in sub-scanning direction.
• If the setting is too narrow, mark of the FD
alignment plate may appear.
494
2
Field Service Ver3.0 Nov.2006