Konica Minolta bizhub PRO 1050 Service Manual page 681

14. MALFUNCTION CODE
Classifi- Error code
cation
SC77-02 Tray up down drive abnormality
SC77-03 Alignment drive abnormality
SC77-04 Paper exit roller drive abnormality
SC77-05 Paper exit opening drive abnormality
SC77-06 Staple abnormality
SC77-07 Staple rotation drive abnormality (skew
rotation)
SC77-08 Staple rotation abnormality (vertical
rotation)
SC77-11 Staple unit /Fr abnormality
SC77-12 Staple unit /Rr abnormality
SC77-15 Paper exit arm drive abnormality
SC77-21 Rear stopper drive abnormality
SC77-22 Stack assist drive abnormality
SC77-25 Intermediate roller open/close drive
abnormality
SC77-30 1st folding cam drive abnormality
SC77-31 2nd folding cam drive abnormality
SC77-32 3rd folding cam drive abnormality
SC77-33 2 holes punch drive abnormality
SC77-34 3 holes/4 holes punch drive abnormality
SC77-35 Punch alignment plate drive abnormality
SC77-36 Punch paper rear registration drive
abnormality
SC77-37 Main tray upper limit abnormality
SC77-38 Main tray lower limit abnormality
SC77-39 PI lift plate /Up up/down abnormality
SC77-40 PI lift plate /Lw up/down abnormality
SC77-41 Entrance conveyance drive abnormality
SC77-42 Intermediate conveyance drive abnormality
SC77-43 PI conveyance drive abnormality
SC77-44 Paper exit conveyance drive abnormality
SC77-60 Bundle exit drive abnormality
SC77-61 Folding main scan alignment drive
abnormality
SC77-62 Folding sub scan alignment paper exit
drive abnormality
646
1
Description
Field Service Ver3.0 Nov.2006
Control while detached
The use of sorting and stapling
functions is unavailable
The use of staple is unavailable
The use of sorting and stapling
functions is unavailable
The use of the folding function
and the punch section is unavail-
able
Main tray paper exit is unavail-
able
The use of the PI section
unavailable
The use of the entire FD unavail-
able
The use of the saddle stitching, multi
center folding and trimmer unavail-
able
The use of the saddle stitching,
multi center folding, multi letter
folding and trimmer unavailable
DIPSW
DIPSW35-1
DIPSW35-0
DIPSW35-1
DIPSW33-0
DIPSW33-2
DIPSW33-3
DIPSW33-4
DIPSW34-0,
1, 3
DIPSW34-0,
1, 2, 3