Initialization - Konica Minolta bizhub PRO 1050 Service Manual

Hide thumbs Also See for bizhub PRO 1050:

Table of Contents

5. FIRMWARE VERSION UP

Initialization

To make use of the Internet ISW, it is necessary to set in advance the network parameter, program server

address and the fire wall address of the copier.

A. Setting from the operation panel

To introduce the copier main body into the network, set the IP address of the copier from the operation panel.

When this setting has been already made, proceed to "(2) Setting from the Web browser."

(1) Procedure

Press the [Utility/counter] button on the operation panel.

Select "06 Machine Manager Setting."

Select "04 Network Setting."

Select "01 Machine NIC Setting."

Enter "IP address," "Subnet mask," and "Gateway Address."

Restart the copier.

• The IP address of the copier is normally assigned by the system administrator. For particulars,

contact the system administrator.

Operating instructions

Field Service Ver3.0 Nov.2006

Table of Contents