Konica Minolta bizhub PRO 1050 Service Manual page 293

Field Service Ver3.0 Nov.2006
[3] [1]
[2]
[1]
[2]
1050fs2077c
[3]
[1]
1050fs2078c
[2]
1050fs2079c
NOTE
• When removing the ribbon cable [1], bring
down the lock lever [3] of the connector [2] in
the direction as shown in the drawing to
release the lock and pullout the ribbon cable.
• When reinstalling the ribbon cable [1], make
sure that the lock lever [2] is released. And
insert the ribbon cable fully into the connector
[3] while taking care that the conductor side
of the ribbon cable comes to the under side of
the lock lever.
And then return the lock lever [1] to its origi-
nal position and lock the ribbon cable [2].
6. OTHERS
261