Konica Minolta bizhub PRO 1050 Service Manual page 593

13. JAM CODE
Classifi- Jam
cation code
ADU J92-01
J92-02
J92-03
J92-04
J93-01
J93-02
J93-03
J94-01
J94-03
558
Cause
The ADU reverse sensor /1 (PS46) does
not turn ON within a specified period of
time after the reverse sensor /1 (PS48)
turns ON.
The ADU reverse sensor /1 (PS46) does
not turn ON again within a specified
period of time after the PS46 turns ON.
The ADU reverse sensor /1 (PS46)
turns ON while in idling.
The ADU reverse sensor /2 (PS45)
turns ON while in idling.
The ADU exit sensor (PS43) does not
turn ON within a specified period of
time after the ADU reverse sensor /1
(PS46) turns ON.
The ADU conveyance sensor /1 (PS35)
turns ON while in idling.
The ADU conveyance sensor /2 (PS36)
turns ON while in idling.
The ADU deceleration sensor (PS42)
does not turn ON within a specified
period of time after the ADU exit sensor
(PS43) turns ON.
The ADU exit sensor (PS43) turns ON
while in idling.
Field Service Ver3.0 Nov.2006
Resulting
operation
If there is a sheet Open the main body
of paper being front doors /R and /L,
printed when a pull out the ADU section
jam occurs, the and remove jammed
main body com- paper if any.
pletes the paper
exit before stop-
ping operations.
—
If there is a sheet Open the main body
of paper being front doors /R and /L,
printed when a pull out the ADU section
jam occurs, the and remove jammed
main body com- paper if any.
pletes the paper
exit before stop-
ping operations.
—
If there is a sheet
of paper being
printed when a
jam occurs, the
main body com-
pletes the paper
exit before stop-
ping operations.
—
Correction