Pick-Up Movement Amount Adjustment (Bypass) - Konica Minolta 8050 Service Manual

OTHER ADJUSTMENTS
9.3 Pick-up movement amount
adjustment (bypass)
Perform the pick-up movement amount adjustment
when a no feed jam occurs frequently.
A. Procedure
1. Pull out the ADU.
2. Remove 6 screws [1] and remove the paper
feed solenoid cover [2].
3. Loosen a screw [1] and adjust the position of the
pick-up solenoid/BP (SD5) [2].
Note:
• Take note of the original scale.
4. Replace the paper feed solenoid cover.
5. Replace the ADU.
6. Perform the copy to check the paper feed oper-
ation.
7. Repeat steps 1 to 6 to adjust the position of SD5
again if the no feed jam continues to occur.
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
[2]
[2]
[1]
1-142
[1]
[1]
8050fs1053
8050fs1054