Accessory Parts; Unpacking The Machine - Konica Minolta Bizhub 4750 Installation Manual

V. Accessory parts
No. Name Q'ty
1. Safety information guide 1
2. Quick start guide 1 set
3. Installation manual 1 set
4. User's guide CD 1
5. CD-ROM 1 set
6. Panel sheet 1
7. Power cord instruction 1
8. Power cord 1
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
Note:
This manual provides the illustrations of the acces-
sory parts and machine that may be slightly differ-
ent in shape from yours. In that case, instead of
the illustrations, use the appearance of your
machine to follow the installation procedure. This
does not cause any significant change or problem
with the procedure.
VI. Unpacking the machine
1. Open the packing carton and remove the acces-
sory parts and cushions.
2. Raise and remove the packing carton.
3. Assign two or more persons and put their hands
at the positions indicated in the illustration to
raise the machine from the box, and place the
machine on the horizontal and robust place.
Be sure to hold the place specified in the
User's Guide or other manuals to transfer
the machine.
Holding other places than the specified in
transferring the machine could cause per-
sonal injury due to the drop of the
machine or other reasons.
(Machine mass: approx. 24 kg (52-15/16
lb))
< When taking the machine out of the carton >
<When transferring the machine after being
installed>
E-3
VII. Removing protective tape, packing
and other shipping materials
1. Remove tapes for protective sheet and get rid of
the protective sheet.
2. Remove all protective tapes and protective mate-
rials used for fixing the machine housing.
3. Open the automatic document feeder (ADF) and
remove the protective tape and protective mate-
rial.
4. Press the front door button to open the front door.
5. Hold the handle and slowly pull out the toner car-
tridge.
6. Hold the handle and slowly pull out the imaging
unit.
E-4