Quick Menu Mode - Trane TR200 Series Programming Manual

How to Program
Data transfer from keypad to frequency converter:
1. Go to par.0-50 LCP Copy
2. Press the [OK] key
3. Select "All from keypad"
4. Press the [OK] key
The parameter settings stored in the keypad are now transferred to the frequency converter indicated by the
progress bar. When 100% is reached, press [OK].
NOTICE
Stop the motor before performing this operation.
Parameter Set-Up
The frequency converter can be used for practically all assignments, thus offering a significant number of pa-
rameters. The series offers a choice between two programming modes - the Quick Menu mode and the Main
Menu mode.
The latter provides access to all parameters. The former takes the user through a few parameters making it
possible to program the majority of TR200 applications.
Regardless of the mode of programming, you can change a parameter both in the Quick Menu mode and in the
Main Menu mode.

Quick Menu mode

Parameter data
The keypad provides access to all parameters listed under the Quick Menus. To set parameters using the [Quick
Menu] button - enter or change parameter data or settings in accordance with the following procedure:
1. Press Quick Menu button
▲ ▼
2.
Use the [ ] and [ ] buttons to find the parameter you want to change
3. Press [OK]
▲ ▼
4.
Use [ ] and [ ] buttons to select the correct parameter setting
5. Press [OK]
6.
To move to a different digit within a parameter setting, use the [
7. Highlighted area indicates digit selected for change
8. Press [Cancel] button to disregard change, or press [OK] to accept change and enter the new setting
26
◀ ▶
] and [ ] buttons
TR200 Programming Guide