Trane TR200 Series Programming Manual page 55

Parameter Description
0-5* Copy / Save
Copy parameter settings between set-ups and to/from the keypad.
0-50 LCP Copy
Option:
[0] * No copy
[1] All to LCP
[2] All from LCP
[3] Size indep. from LCP
This parameter cannot be adjusted while the motor is running.
0-51 Set-up Copy
Option:
[0] * No copy
[1] Copy to set-up 1
[2] Copy to set-up 2
[3] Copy to set-up 3
[4] Copy to set-up 4
[9] Copy to all
0-6* Password
Define password access to menus.
0-60 Main Menu Password
Range:
100 N/ [0 - 999 N/A]
A*
0-61 Access to Main Menu w/o Password
Option:
[0] * Full access
[1] Read only
[2] No access
Full access
If [0] is selected then par.0-60
0-66 Access to Personal Menu w/o Password
54
Function:
No function
Copies all parameters in all set-ups from the frequency converter mem-
ory to the keypad memory. For service purposes it is recommended to
copy all parameters to the keypad after commissioning.
Copies all parameters in all set-ups from the keypad memory to the fre-
quency converter memory.
Copies only the parameters that are independent of the motor size. The
latter selection can be used to program several frequency converters
with the same function without disturbing motor data which are already
set.
Function:
No function
Copies all parameters in the present Programming Set-up (defined in
par.0-11 Programming Set-up) to Set-up 1.
Copies all parameters in the present Programming Set-up (defined in
par.0-11 Programming Set-up) to Set-up 2.
Copies all parameters in the present Programming Set-up (defined in
par.0-11 Programming Set-up) to Set-up 3.
Copies all parameters in the present Programming Set-up (defined in
par.0-11 Programming Set-up) to Set-up 4.
Copies the parameters in the present set-up over to each of the set-ups
1 to 4.
Function:
Define the password for access to the Main Menu via the [Main Menu]
key. If par.0-61 Access to Main Menu w/o Password
[0], this parameter will be ignored.
Function:
Disables password defined in par.0-60
Prevent unauthorized editing of Main Menu parameters.
Prevent unauthorized viewing and editing of Main Menu parameters.
Main Menu Password, par.0-65
will be ignored.
is set to
Main Menu Password.
Personal Menu Password
TR200 Programming Guide
Full access
and par.