Trane TR200 Series Programming Manual page 144

[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[30] SL Time-out 0
[31] SL Time-out 1
[32] SL Time-out 2
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto Reset Trip
[43] OK Key
[44] Reset Key
[45] Left Key
[46] Right Key
[47] Up Key
[48] Down Key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Time-out 3
[71] SL Time-out 4
[72] SL Time-out 5
[73] SL Time-out 6
[74] SL Time-out 7
TR200 Programming Guide
Use the result of comparator 3 in the logic rule.
Use the result of logic rule 0 in the logic rule.
Use the result of logic rule 1 in the logic rule.
Use the result of logic rule 2 in the logic rule.
Use the result of logic rule 3 in the logic rule.
Use the result of timer 0 in the logic rule.
Use the result of timer 1 in the logic rule.
Use the result of timer 2 in the logic rule.
Use the value of DI18 in the logic rule (High = TRUE).
Use the value of DI19 in the logic rule (High = TRUE).
Use the value of DI27 in the logic rule (High = TRUE).
Use the value of DI29 in the logic rule (High = TRUE).
Use the value of DI32 in the logic rule (High = TRUE).
Use the value of DI33 in the logic rule (High = TRUE).
This logic rule is TRUE if the frequency converter is started by any means
(either via digital input, field bus or other).
This logic rule is TRUE if the frequency converter is stopped or coasted
by any means (either via digital input, fieldbus or other).
This logic rule is TRUE if the frequency converter is tripped (but not trip-
locked) and the reset button is pressed.
This logic rule is TRUE if the frequency converter is tripped (but not trip-
locked) and an Automatic Reset is issued.
This logic rule is TRUE if the OK key on the keypad is pressed.
This logic rule is TRUE if the Reset key on the keypad is pressed.
This logic rule is TRUE if the Left key on the keypad is pressed.
This logic rule is TRUE if the Right key on the keypad is pressed.
This logic rule is TRUE if the Up key on the keypad is pressed.
This logic rule is TRUE if the Down key on the keypad is pressed.
Use the result of comparator 4 in the logic rule.
Use the result of comparator 5 in the logic rule.
Use the result of logic rule 4 in the logic rule.
Use the result of logic rule 5 in the logic rule.
Use the result of timer 3 in the logic rule.
Use the result of timer 4 in the logic rule.
Use the result of timer 5 in the logic rule.
Use the result of timer 6 in the logic rule.
Use the result of timer 7 in the logic rule.
Parameter Description
143