Trane TR200 Series Programming Manual page 24

Keys
Menu keys
The menu keys are divided into functions. The keys
below the display and indicator lamps are used for
parameter set-up, including choice of display indica-
tion during normal operation.
[Status]
indicates the status of the frequency converter and/or the motor. 3 different readouts can be chosen by pressing
the [Status] key:
5 line readouts, 4 line readouts or Smart Logic Control.
Use [Status] for selecting the mode of display or for changing back to Display mode from either the Quick Menu
mode, the Main Menu mode or Alarm mode. Also use the [Status] key to toggle single or double read-out mode.
[Quick Menu]
allows quick set-up of the frequency converter. The most common TR200 functions can be programmed here.
The [Quick Menu] consists of:
My Personal Menu
-
Quick Set-up
-
Function Set-up
-
Changes Made
-
Loggings
-
The Function set-up provides quick and easy access to all parameters required for the majority of TR200 appli-
cations including most VAV and CAV supply and return fans, cooling tower fans, Primary, Secondary and
Condenser Water Pumps and other pump, fan and compressor applications. Amongst other features it also
includes parameters for selecting which variables to display on the keypad, digital preset speeds, scaling of
analog references, closed loop single zone and multi-zone applications and specific functions related to Fans,
Pumps and Compressors.
The Quick Menu parameters can be accessed immediately unless a password has been created via par.
0-60 Main Menu Password, par.0-61
par.0-66 Access to Personal Menu w/o
It is possible to switch directly between Quick Menu mode and Main Menu mode.
[Main Menu]
is used for programming all parameters.The Main Menu parameters can be accessed immediately unless a
password has been created via par.0-60
word,par.0-65 Personal Menu Password
of TR200 applications it is not necessary to access the Main Menu parameters but instead the Quick Menu, Quick
Set-up and Function Set-up provides the simplest and quickest access to the typical required parameters.
It is possible to switch directly between Main Menu mode and Quick Menu mode.
Parameter shortcut can be carried out by pressing down the [Main Menu] key for 3 seconds. The parameter
shortcut allows direct access to any parameter.
[Alarm Log]
displays an Alarm list of the five latest alarms (numbered A1-A5). To obtain additional details about an alarm,
use the arrow keys to manoeuvre to the alarm number and press [OK]. Information is displayed about the con-
dition of the frequency converter before it enters the alarm mode.
The Alarm log button on the keypad allows access to both Alarm log and Maintenance log.
TR200 Programming Guide
Access to Main Menu w/o
Password.
Main Menu Password, par.0-61
or par.0-66 Access to Personal Menu w/o
Password, par.0-65 Personal Menu Password
Access to Main Menu w/o Pass-
Password. For the majority
How to Program
or
23