Trane TR200 Series Programming Manual page 172

16-1* Motor Status
Parameters for reading the motor status values.
16-10 Power [kW]
Range:
0.00 [0.00 - 10000.00 kW]
kW*
16-11 Power [hp]
Range:
0.00 hp* [0.00 - 10000.00 hp]
16-12 Motor Voltage
Range:
0.0 V* [0.0 - 6000.0 V]
16-13 Frequency
Range:
0.0 Hz* [0.0 - 6500.0 Hz]
16-14 Motor Current
Range:
0.00 A* [0.00 - 10000.00 A]
16-15 Frequency [%]
Range:
0.00 %* [-100.00 - 100.00 %]
16-16 Torque [Nm]
Range:
0.0 Nm* [-30000.0 - 30000.0 Nm]
16-17 Speed [RPM]
Range:
0 RPM* [-30000 - 30000 RPM]
TR200 Programming Guide
Function:
View the motor power in kW. The value shown is calculated on the basis
of the actual motor voltage and motor current. The value is filtered, and
therefore approx. 30 ms may pass from when an input value changes to
when the data read-out values change.
Function:
View the motor power in HP. The value shown is calculated on the basis
of the actual motor voltage and motor current. The value is filtered, and
therefore approximately 30 ms may pass from when an input value
changes to when the data read-out values change.
Function:
View the motor voltage, a calculated value used for controlling the mo-
tor.
Function:
View the motor frequency, without resonance dampening.
Function:
View the motor current measured as a mean value, IRMS. The value is
filtered, and thus approximately 30 ms may pass from when an input
value changes to when the data read-out values change.
Function:
View a two-byte word reporting the actual motor frequency (without
resonance dampening) as a percentage (scale 0000-4000 Hex) of par.
4-19 Max Output Frequency.
Function:
View the torque value with sign, applied to the motor shaft. Linearity is
not exact between 110% motor current and torque in relation to the rated
torque. Some motors supply more than 160% torque. Consequently, the
min. value and the max. value will depend on the max. motor current as
well as the motor used. The value is filtered, and thus approx. 1.3 sec-
onds may pass from when an input changes value to when the data read-
out values change.
Function:
View the actual motor RPM.
Parameter Description
171