Main Menu - Communications And Options - Group 8 - Trane TR200 Series Programming Manual

Main Menu - Communications and Options - Group 8

8-** Comm. and Options
Parameter group for configuring communications and options.
8-0* General Settings
General settings for communications and options.
8-01 Control Site
Option:
[0] * Digital and ctrl.word
[1] Digital only
[2] Controlword only
8-02 Control Source
Option:
[0] None
[1] FC Port
[2] USB Port
[3] * Option A
[4] Option B
[5] Option C0
[6] Option C1
[30] External Can
NOTE: This parameter cannot be adjusted while the motor is running.
TR200 Programming Guide
Function:
The setting in this parameter overrides the settings in par.8-50
Select to par.8-56 Preset Reference
Control by using both digital input and control word.
Control by using digital inputs only.
Control by using control word only.
Function:
Select the source of the control word: one of two serial interfaces or four
installed options. During initial power-up, the frequency converter auto-
matically sets this parameter to
option installed in slot A. If the option is removed, the frequency con-
verter detects a change in the configuration, sets par.8-02
Source back to default setting
trips. If an option is installed after initial power-up, the setting of par.
8-02 Control Source will not change but the frequency converter will trip
Option Changed
and display: Alarm 67
Parameter Description
Select.
Option A
[3] if it detects a valid fieldbus
FC Port
, and the frequency converter then
.
Coasting
Control
125