Trane TR200 Series Programming Manual page 228

23-13 Maintenance Time Interval
Range:
1 h* [1 - 2147483647 h]
23-14 Maintenance Date and Time
Range:
0 N/A* [0 - 0 N/A]
23-15 Reset Maintenance Word
Option:
[0] * Do not reset
[1] Do reset
Note
When messages are reset - Maintenance Item, Action and Maintenance Date/Time are not cancelled. par.
23-12 Maintenance Time Base
23-16 Maintenance Text
Range:
0 N/A* [0 - 0 N/A]
TR200 Programming Guide
Function:
Set the interval associated with the current Preventive Maintenance
Event. This parameter is only used if
Hours
[2] is selected in par.23-12
reset from par.23-15
Example:
A Preventive Maintenance Event is set up Monday at 8:00. par.
23-12 Maintenance Time Base
tenance Time Interval
will be indicated the following Monday at 8:00. If this Maintenance Event
is not reset until Tuesday at 9:00, the next occurrence will be the follow-
ing Tuesday at 9:00.
Function:
Set the date and time for next maintenance occurrence if the Preventive
Maintenance Event is based on date/time. Date format depends on the
setting in par.0-71
setting in par.0-72
NOTICE
The frequency converter has no back up of the clock function and the set
date/time will reset to default (2000-01-01 00:00) after a power down. In par.
0-79 Clock Fault it is possible to program for a Warning in case the clock has
not been set properly, e.g. after a power down.
The time set must be at least one hour from the actual time!
NOTICE
When mounting an Analog I/O MCB 115 option card, a battery back up of the
date and time is included.
Function:
Set this parameter to
16-96 Maintenance Word
keypad. This parameter will change back to
ing OK.
is set to Disabled [0].
Function:
Parameter Description
Running Hours
Maintenance Time
Reset Maintenance Word.
Operating hours
is
is 7 x 24 hours=168 hours. Next Maintenance Event
Date Format while the time format depends on the
Time Format.
Do reset
[1] to reset the Maintenance Word in par.
and reset the message displayed in the
Do not reset
Operating
[1] or
Base. The timer is
[2] and par.23-13 Main-
[0] when press-
227