Trane TR200 Series Programming Manual page 142

[17] Analog input AICCT
[18] Pulse input FI29
[19] Pulse input FI33
[20] Alarm number
[30] Counter A
[31] Counter B
13-11 Comparator Operator
Array [6]
Option:
[0] * <
[1] ≈ (equal)
[2] >
13-12 Comparator Value
Array [6]
Range:
0 N/A* [-100000.000 - 100000.000
N/A]
13-2* Timers
This parameter group consists of timer parameters.
Use the result (TRUE or FALSE) from
logic rule
boolean input in a
13-44 Logic Rule Boolean 3). A timer is only FALSE when started by an action (i.e. Start timer 1 [29]) until the
timer value entered in this parameter is elapsed. Then it becomes TRUE again.
All parameters in this parameter group are array parameters with index 0 to 2. Select index 0 to program Timer
0, select index 1 to program Timer 1, and so on.
13-20 SL Controller Timer
Array [3]
Range:
0.000 N/ [0.000 - 0.000 N/A]
A*
TR200 Programming Guide
Function:
Select < [0] for the result of the evaluation to be TRUE, when the variable
selected in par.13-10
in par.13-12 Comparator
selected in par.13-10
in par.13-12 Comparator
Select ≈ [1] for the result of the evaluation to be TRUE, when the variable
selected in par.13-10
fixed value in par.13-12
Select > [2] for the inverse logic of option < [0].
Function:
Enter the 'trigger level' for the variable that is monitored by this compa-
rator. This is an array parameter containing comparator values 0 to 5.
timers
directly to define an
(see par.13-40 Logic Rule Boolean
Function:
Enter the value to define the duration of the FALSE output from the pro-
grammed timer. A timer is only FALSE if it is started by an action (i.e.
Start timer 1
[29]) and until the given timer value has elapsed.
Parameter Description
Comparator Operand is smaller than the fixed value
Value. The result will be FALSE, if the variable
Comparator Operand is greater than the fixed value
Value.
Comparator Operand is approximately equal to the
Comparator Value.
event
(see par.13-51 SL Controller
1, par.13-42 Logic Rule Boolean 2
Event), or as
or par.
141