Trane TR200 Series Programming Manual page 44

[0] * Not linked
[1] Set-up 1
[2] Set-up 2
[3] Set-up 3
[4] Set-up 4
TR200 Programming Guide
OR
2. While still in Set-up 1, using par.0-50
up 2. Then set par.0-12 This Set-up Linked to
the linking process.
After the link is complete, par.0-13
to indicate that all 'not changeable during operation' parameters are now
the same in Set-up 1 and Set-up 2. If there are changes to a 'not change-
able during operation' parameter, e.g. par.1-30
Set-up 2, they will also be changed automatically in Set-up 1. A switch
between Set-up 1 and Set-up 2 during operation is now possible.
Parameter Description
LCP Copy, copy Set-up 1 to Set-
Set-up 2
to [2]. This will start
Readout: Linked Set-ups will read {1,2}
Stator Resistance (Rs), in
43