Trane TR200 Series Programming Manual page 53

Parameter Description
0-38 Display Text 2
Range:
0 N/A* [0 - 0 N/A]
0-39 Display Text 3
Range:
0 N/A* [0 - 0 N/A]
Keypad, 0-4*
Enable, disable and password protect individual keys on the keypad.
0-40 [Hand on] Key on LCP
Option:
[0] Disabled
[1] * Enabled
[2] Password
0-41 [Off] Key on LCP
Option:
[0] Disabled
[1] * Enabled
[2] Password
52
Function:
In this parameter it is possible to write an individual text string for display
in the keypad or to be read via serial communication. If to be displayed
permanently select Display Text 2 in par.0-20
0-21 Display Line 1.2 Small, par.0-22
0-23 Display Line 2 Large or par.0-24
▼
buttons on the keypad to change a character. Use the
to move the cursor. When a character is highlighted by the cursor, this
character can be changed. A character can be inserted by placing the
cursor between two characters and pressing
Function:
In this parameter it is possible to write an individual text string for display
in the keypad or to be read via serial communication. If to be displayed
permanently select Display Text 3 in par.0-20
0-21 Display Line 1.2 Small, par.0-22
0-23 Display Line 2 Large or par.0-24
▼
buttons on the keypad to change a character. Use the
to move the cursor. When a character is highlighted by the cursor, this
character can be changed. A character can be inserted by placing the
cursor between two characters and pressing
Function:
No function
[Hand on] Key enabled
Avoid unauthorized start in Hand mode. If par.0-40
LCPis included in the My Personal Menu, then define the password in
par.0-65 Personal Menu Password. Otherwise define the password in
par.0-60 Main Menu Password.
Function:
No function
[Off] Key is enabled
Avoid unauthorized stop. If par.0-41
My Personal Menu, then define the password in par.0-65
Password. Otherwise define the password in par.0-60
word.
Display Line 1.1 Small, par.
Display Line 1.3 Small, par.
Display Line 3 Large. Use the
◀ ▶
and
▲ ▼
or .
Display Line 1.1 Small,par.
Display Line 1.3 Small, par.
Display Line 3 Large. Use the
◀ ▶
and
▲ ▼
or .
[Hand on] Key on
[Off] Key on LCP is included in the
Personal Menu
Main Menu Pass-
TR200 Programming Guide
▲
or
buttons
▲
or
buttons