Trane TR200 Series Programming Manual page 143

Parameter Description
13-4* Logic Rules
Combine up to three boolean inputs (TRUE / FALSE inputs) from timers, comparators, digital inputs, status bits
and events using the logical operators AND, OR, and NOT. Select boolean inputs for the calculation in par.
13-40 Logic Rule Boolean 1, par.13-42
operators used to logically combine the selected inputs in par.13-41
Rule Operator 2.
Priority of calculation
The results of par.13-40 Logic Rule Boolean
2 are calculated first. The outcome (TRUE / FALSE) of this calculation is combined with the settings of par.
13-43 Logic Rule Operator 2
logic rule.
13-40 Logic Rule Boolean 1
Array [6]
Option:
[0] * False
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current limit
[7] Out of current range
[8] Below I low
[9] Above I high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
142
Logic Rule Boolean 2
1, par.13-41
and par.13-44 Logic Rule Boolean
Function:
Enters the fixed value of FALSE in the logic rule.
Enters the fixed value TRUE in the logic rule.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
Use the result of comparator 0 in the logic rule.
Use the result of comparator 1 in the logic rule.
Use the result of comparator 2 in the logic rule.
and par.13-44 Logic Rule Boolean
Logic Rule Operator 1
Logic Rule Operator 1 and par.13-42
3, yielding the final result (TRUE / FALSE) of the
3. Define the
and par.13-43 Logic
Logic Rule Boolean
TR200 Programming Guide