Trane TR200 Series Programming Manual page 101

Parameter Description
[30] Brake fault (IGBT)
[35] External Interlock
[40] Out of ref range
[41] Below reference low
[42] Above reference high
[45] Bus Ctrl
[46] Bus Ctrl 1 if timeout
[47] Bus Ctrl 0 if timeout
[55] Pulse output
[60] Comparator 0
[61] Comparator 1
[62] Comparator 2
[63] Comparator 3
[64] Comparator 4
[65] Comparator 5
[70] Logic Rule 0
[71] Logic Rule 1
[72] Logic Rule 2
[73] Logic Rule 3
[74] Logic Rule 4
[75] Logic Rule 5
[80] SL Digital Output A
[81] SL Digital Output B
[82] SL Digital Output C
[83] SL Digital Output D
100
The output is Logic '1' when the brake IGBT is short-circuited. Use this
function to protect the frequency converter if there is a fault on the brake
modules. Use the output/relay to cut out the main voltage from the fre-
quency converter.
External Interlock function has been activated via one of the digital in-
puts.
See par. group 13-1*. If Comparator 0 is evaluated as TRUE, the output
will go high. Otherwise, it will be low.
See par. group 13-1*. If Comparator 2 is evaluated as TRUE, the output
will go high. Otherwise, it will be low.
See par. group 13-1*. If Comparator 2 is evaluated as TRUE, the output
will go high. Otherwise, it will be low.
See par. group 13-1*. If Comparator 3 is evaluated as TRUE, the output
will go high. Otherwise, it will be low.
See par. group 13-1*. If Comparator 4 is evaluated as TRUE, the output
will go high. Otherwise, it will be low.
See par. group 13-1*. If Comparator 5 is evaluated as TRUE, the output
will go high. Otherwise, it will be low.
See par. group 13-4*. If Logic Rule 0 is evaluated as TRUE, the output
will go high. Otherwise, it will be low.
See par. group 13-4*. If Logic Rule 1 is evaluated as TRUE, the output
will go high. Otherwise, it will be low.
See par. group 13-4*. If Logic Rule 2 is evaluated as TRUE, the output
will go high. Otherwise, it will be low.
See par. group 13-4*. If Logic Rule 3 is evaluated as TRUE, the output
will go high. Otherwise, it will be low.
See par. group 13-4*. If Logic Rule 4 is evaluated as TRUE, the output
will go high. Otherwise, it will be low.
See par. group 13-4*. If Logic Rule 5 is evaluated as TRUE, the output
will go high. Otherwise, it will be low.
See par.13-52 SL Controller
Set dig. out. A high
Smart Logic Action [38]
low whenever the Smart Logic Action [32] Set dig. out. A low is executed.
See par.13-52 SL Controller
Set dig. out. Bhigh
Smart Logic Action [39]
low whenever the Smart Logic Action [33]
See par.13-52 SL Controller
Set dig. out. C high
Smart Logic Action [40]
low whenever the Smart Logic Action [34]
See par.13-52 SL Controller
Set dig. out. D
Smart Logic Action [41]
low whenever the Smart Logic Action [35]
Action. The input will go high whenever the
is executed. The input will go
Action. The input will go high whenever the
is executed. The input will go
Set dig. out. B low
Action. The input will go high whenever the
is executed. The input will go
Set dig. out. C low
Action. The input will go high whenever the
high is executed. The input will go
Set dig. out. D low
TR200 Programming Guide
is executed.
is executed.
is executed.