Trane TR200 Series Programming Manual page 75

Parameter Description
3-11 Jog Speed [Hz]
Range:
10.0 Hz* [0.0 - par. 4-14 Hz]
3-13 Reference Site
Option:
[0] * Linked to Hand / Auto
[1] Remote
[2] Local
74
Function:
The jog speed is a fixed output speed at which the frequency converter
is running when the jog function is activated.
See also par.3-80 Jog Ramp
Function:
Select which reference site to activate.
Use local reference when in Hand mode; or remote reference when in
Auto mode.
Use remote reference in both Hand mode and Auto mode.
Use local reference in both Hand mode and Auto mode.
NOTICE
When set to Local [2], the frequency converter will start with this setting again
following a 'power down'.
Time.
TR200 Programming Guide