Trane TR200 Series Programming Manual page 29

How to Program
Example of using the Quick Setup option:
Assume you want to set the Ramp Down Time to 100 seconds!
1. Select [Quick Setup]. The first par.0-01
▼
2.
Press [ ] repeatedly until par.3-42
3. Press [OK]
◀
4.
Use the [ ] button to highlight the 3rd digit before the comma
5.
Change '0' to '1' by using the [
▶
6.
Use the [ ] button to highlight the digit '2'
7.
Change '2' to '0' with the [
8. Press [OK]
The new ramp-down time is now set to 100 seconds.
It is recommended to do the set-up in the order listed.
NOTE: A complete description of the function is found in the parameter sections of this manual.
Illustration 3. 6: Quick Menu view.
The Quick Setup menu gives access to the 18 most important setup parameters of the frequency converter. After
programming the frequency converter will, in most cases, be ready for operation. The 18 Quick Setup parameters
are shown in the table below. A complete description of the function is given in the parameter description
sections of this manual.
28
Language in Quick Setup appears
Ramp 1 Ramp Down Time
▲
] button
▼
] button
appears with the default setting of 20 seconds
TR200 Programming Guide