Trane TR200 Series Programming Manual page 57

Parameter Description
0-74 DST/Summertime
Option:
[0] * Off
[2] Manual
0-76 DST/Summertime Start
Range:
0 N/A* [0 - 0 N/A]
0-77 DST/Summertime End
Range:
0 N/A* [0 - 0 N/A]
0-79 Clock Fault
Option:
[0] * Disabled
[1] Enabled
0-81 Working Days
Array with 7 elements [0] - [6] displayed below parameter number in display. Press OK and step between elements by means of
▲ ▼
and buttons on the keypad.
Option:
[0] * No
[1] Yes
0-82 Additional Working Days
Array with 5 elements [0] - [4] displayed below parameter number in display. Press OK and step between elements by means of
▲ ▼
and buttons on the keypad.
Range:
0 N/A* [0 - 0 N/A]
0-83 Additional Non-Working Days
Array with 15 elements [0] - [14] displayed below parameter number in display. Press OK and step between elements by means
▲ ▼
of and buttons on the keypad.
Range:
0 N/A* [0 - 0 N/A]
56
Function:
Choose how Daylight Saving Time/Summertime should be handled. For
manual DST/Summertime enter the start date and end date in par.
0-76 DST/Summertime Start
Function:
Sets the date and time when summertime/DST starts. The date is pro-
grammed in the format selected in par.0-71
Function:
Sets the date and time when summertime/DST ends. The date is pro-
grammed in the format selected in par.0-71
Function:
Enables or disables the clock warning, when the clock has not been set
or has been reset due to a power-down and no backup is installed.
Function:
Set for each weekday if it is a working day or a non-working day. First
element of the array is Monday. The working days are used for Timed
Actions.
Function:
Defines dates for additional working days that normally would be non-
working days according to par.0-81
Function:
Defines dates for additional working days that normally would be non-
working days according to par.0-81
and par.0-77 DST/Summertime
Date Format.
Date Format.
Working Days.
Working Days.
TR200 Programming Guide
End.