Trane TR200 Series Programming Manual page 189

Parameter Description
[71] bar
[72] Pa
[73] kPa
[74] m WG
[75] mm Hg
[80] kW
[120] GPM
[121] gal/s
[122] gal/min
[123] gal/h
[124] CFM
[125] ft³/s
[126] ft³/min
[127] ft³/h
[130] lb/s
[131] lb/min
[132] lb/h
[140] ft/s
[141] ft/min
[145] ft
[160] °F
[170] psi
[171] lb/in²
[172] in WG
[173] ft WG
[174] in Hg
[180] HP
20-12 Reference/Feedback Unit
Option:
20-13 Minimum Reference/Feedb.
Range:
0.000 [-999999.999 - par. 20-14
Proc- ProcessCtrlUnit]
essCtrlU-
nit*
NOTE: If operating with par.1-00
be used.
188
Function:
See par.20-02 Feedback 1 Source Unit
Function:
Enter the desired minimum value for the remote reference when oper-
ating with par.1-00 Configuration Mode
Units are set in par.20-12
Minimum feedback will be -200% of either the value set in par.
20-13 Minimum Reference/Feedb.
Feedb., which ever numeric value is the highest.
Configuration Mode set for Open Loop [0], par.3-02
for details.
set for Closed Loop [3] operation.
Reference/Feedback Unit.
or in par.20-14 Maximum Reference/
Minimum Reference
TR200 Programming Guide
must