Trane TR200 Series Programming Manual page 234

23-62 Timed Bin Data
Range:
0 N/A* [0 - 4294967295 N/A]
23-63 Timed Period Start
Range:
0 N/A* [0 - 0 N/A]
Note
The frequency converter has no back up of the clock function and the set date/time will reset to default
(2000-01-01 00:00) after a power down unless a Real Time Clock module with back up is installed. Consequently
the logging will be stopped until date/time is readjusted in par.0-70
possible to program for a Warning in case clock not has been set properly, e.g. after a power down.
Note
When mounting an Analog I/O MCB 115 option card, a battery back up of the date and time is included.
23-64 Timed Period Stop
Range:
0 N/A* [0 - 0 N/A]
Note
When mounting an Analog I/O MCB 115 option card, a battery back up of the date and time is included.
23-65 Minimum Bin Value
Range:
0 %* [0 - 100. %]
TR200 Programming Guide
Function:
Array with 10 elements ([0]-[9] below parameter number in display).
Press OK and step between elements by means of
the keypad.
10 counters with the frequency of occurrence for the operating data
monitored sorted according to the intervals as for par.23-61
Bin Data.
Starts to count at the date/time programmed in par.23-63
Start, and stops at the time/date programmed in par.23-64
Stop. All counters can be reset to 0 in par.23-67
Function:
Set the date and time at which the Trending starts the update of the
Timed Bin counters.
Date format will depend on setting in par.0-71
format on setting in par.0-72
Function:
Set the date and time at which the Trend Analyses must stop update of
the Timed Bin counters.
Date format will depend on setting in par.0-71
format on setting in par.0-72
Function:
Array with 10 elements ([0]-[9] below parameter number in display).
Press OK and step between elements by means of
the keypad.
Set the minimum limit for each interval in par.23-61
ta and par.23-62 Timed Bin
changing setting from 10% to 12%,
counter
terval 0 - <12% and
Parameter Description
▲
and
Reset Timed Bin
Date Format, and time
Time Format.
Date and Time. In par.0-79
Date Format, and time
Time Format.
▲
and
Continuous Bin Da-
Data. Example: if selecting
counter
[0] will be based on the in-
[1] on interval 12% - <20%.
▼
buttons on
Continuous
Timed Period
Timed Period
Data.
Clock Fault it is
▼
buttons on
counter
[1] and
233