Trane TR200 Series Programming Manual page 132

8-53 Start Select
Option:
[0] Digital input
[1] Bus
[2] Logic AND
[3] * Logic OR
NOTE: This parameter is active only when par.8-01
8-54 Reversing Select
Option:
[0] * Digital input
[1] Bus
[2] Logic AND
[3] Logic OR
NOTE: This parameter is active only when par.8-01
8-55 Set-up Select
Option:
[0] Digital input
[1] Bus
[2] Logic AND
[3] * Logic OR
NOTE: This parameter is active only when par.8-01
8-56 Preset Reference Select
Option:
[0] Digital input
TR200 Programming Guide
Function:
Select control of the frequency converter start function via the terminals
(digital input) and/or via the fieldbus.
Activates Start command via a digital input.
Activates Start command via the serial communication port or fieldbus
option.
Activates Start command via the fieldbus/serial communication port,
AND additionally via one of the digital inputs.
Activates Start command via the fieldbus/serial communication port OR
via one of the digital inputs.
Control Site is set to [0]
Function:
Select control of the frequency converter reverse function via the termi-
nals (digital input) and/or via the fieldbus.
Activates Reverse command via a digital input.
Activates Reverse command via the serial communication port or field-
bus option.
Activates Reverse command via the fieldbus/serial communication port,
AND additionally via one of the digital inputs.
Activates Reverse command via the fieldbus/serial communication port
OR via one of the digital inputs.
Control Site is set to [0]
Function:
Select control of the frequency converter set-up selection via the termi-
nals (digital input) and/or via the fieldbus.
Activates the set-up selection via a digital input.
Activates the set-up selection via the serial communication port or field-
bus option.
Activates the set-up selection via the fieldbus/serial communication port,
AND additionally via one of the digital inputs.
Activate the set-up selection via the fieldbus/serial communication port
OR via one of the digital inputs.
Control Site is set to [0]
Function:
Select control of the frequency converter Preset Reference selection via
the terminals (digital input) and/or via the fieldbus.
Activates Preset Reference selection via a digital input.
Parameter Description
Digital and control word
.
Digital and control word
.
Digital and control word
.
131