Trane TR200 Series Programming Manual page 151

Parameter Description
[15] Select preset ref 5
[16] Select preset ref 6
[17] Select preset ref 7
[18] Select ramp 1
[19] Select ramp 2
[22] Run
[23] Run reverse
[24] Stop
[26] DC Brake
[27] Coast
[28] Freeze output
[29] Start timer 0
[30] Start timer 1
[31] Start timer 2
[32] Set digital out A low
[33] Set digital out B low
[34] Set digital out C low
[35] Set digital out D low
[36] Set digital out E low
[37] Set digital out F low
[38] Set digital out A high
[39] Set digital out B high
[40] Set digital out C high
[41] Set digital out D high
[42] Set digital out E high
[43] Set digital out F high
[60] Reset Counter A
[61] Reset Counter B
[70] Start Timer 3
[71] Start Timer 4
[72] Start Timer 5
[73] Start Timer 6
[74] Start Timer 7
[80] Sleep Mode
150
Selects preset reference 5.
Selects preset reference 6.
Selects preset reference 7. If the active preset reference is changed, it will
merge with other preset reference commands coming from either the
digital inputs or via a fieldbus.
Selects ramp 1
Selects ramp 2
Issues a start command to the frequency converter.
Issues a start reverse command to the frequency converter.
Issues a stop command to the frequency converter.
Issues a DC stop command to the frequency converter.
The frequency converter coasts immediately. All stop commands includ-
ing the coast command stop the SLC.
Freezes the output frequency of the frequency converter.
Starts timer 0, see par.13-20
Starts timer 1, see par.13-20
Starts timer 2, see par.13-20
Any output with 'digital output 1' selected is low (off).
Any output with 'digital output 2' selected is low (off).
Any output with 'digital output 3' selected is low (off).
Any output with 'digital output 4' selected is low (off).
Any output with 'digital output 5' selected is low (off).
Any output with 'digital output 6' selected is low (off).
Any output with 'digital output 1' selected is high (closed).
Any output with 'digital output 2' selected is high (closed).
Any output with 'digital output 3' selected is high (closed).
Any output with 'digital output 4' selected is high (closed).
Any output with 'digital output 5' selected is high (closed).
Any output with 'digital output 6' selected is high (closed).
Resets Counter A to zero.
Resets Counter A to zero.
Starts timer 3, see par.13-20
Starts timer 4, see par.13-20
Starts timer 5, see par.13-20
Starts timer 6, see par.13-20
Starts timer 7, see par.13-20
SL Controller Timer for further description.
SL Controller Timer for further description.
SL Controller Timer for further description.
SL Controller Timer for further description.
SL Controller Timer for further description.
SL Controller Timer for further description.
SL Controller Timer for further description.
SL Controller Timer for further description.
TR200 Programming Guide