Trane TR200 Series Programming Manual page 73

Parameter Description
Note
Remove a warning arising in connection with
Off
be corrected first. For [0] or
2-16 AC brake Max. Current
Range:
100.0 [0.0 - 1000.0 %]
%*
2-17 Over-voltage Control
Option:
[0] Disabled
[2] * Enabled
NOTE: The ramp time is automatically adjusted to avoid tripping of the frequency converter.
72
Off Warning
[0] or
Warning
[1], the frequency converter keeps running even if a fault is located.
Function:
Enter the maximum permissible current when using AC brake to avoid
overheating of motor windings. The AC brake function is available in Flux
mode only (FC 302 only).
Function:
Over-voltage control (OVC) reduces the risk of the frequency converter
tripping due to an over voltage on the DC link caused by generative pow-
er from the load.
No OVC required.
Activates OVC.
[1] by cycling the mains supply. The fault must
TR200 Programming Guide