Parameter Lists; Parameter Lists Tr200; Default Settings - Trane TR200 Series Programming Manual

Parameter Lists

Parameter Lists TR200

Default Settings

Changes during operation:
"TRUE" means that the parameter can be changed while the frequency converter is in operation and "FALSE"
means that the frequency converter must be stopped before a change can be made.
4-Set-up:
'All set-up': the parameter can be set individually in each of the four set-ups, i. e. one single parameter can have
four different data values.
'1 set-up': data value will be the same in all set-ups.
SR:
Size related
Conversion index:
This number refers to a conversion figure used when writing or reading by means of a frequency converter.
Conv. index
100 67
Conv. factor
1 1/60 1000000
Data type Description
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Visible String
33 Normalized value 2 bytes
35 Bit sequence of 16 boolean variables
54 Time difference w/o date
256
6 5 4 3
100000 10000 1000 100
N/A:
No default value available.
2 1 0 -1 -2
10 1 0.1 0.01
-3 -4 -5 -6
0.001 0.0001 0.00001 0.000001
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD
TR200 Programming Guide