Chapter 8: Post-installation administration
This section covers the following tasks:
Verifying translations
●
Setting daylight savings time rules
●
Setting locations (if necessary)
●
Verifying date and time
●
Clearing and resolving alarms
●
Backing up files to the compact flash media
●
Enabling alarms to INADS via modem
●
Enabling alarms to INADS via SNMP
●
Before leaving the site
●
Verifying translations
1. Open a SAT session on the media server.
2. Type list configuration all and press Enter to view all the administered circuit
packs in the system.
3. Type list ipserver-interface and press Enter to verify the location of the IPSI
circuit packs.
4. Refer to your planning documents and check the administration status on the following
items:
●
list station
●
list trunk-group
●
list hunt-group
Installing and Configuring the Avaya S8500 Media Server
on page 83
on page 84
on page 85
on page 86
on page 86
on page 87
on page 88
on page 88
on page 87
83
February 2006