Printing With Crop Marks - Roland VersaArt RE-640 User Manual

Printing with Crop Marks

Printing with Crop Marks

The media printed with a crop mark can be set on and cut with the cutting device.
(Example: You can re-set and cut a media with laminate processing after printing.)
Use your software RIP to make the settings for printing crop marks. For information on how to make the set-
ting, refer to the documentation for the software RIP you're using.
Alignment marks and symbols drawn using a graphics program cannot be used as crop marks.
The crop marks are printed as shown in the figure.
Crop Mark
(Align point 3)
4
Crop Mark
(Align point 1)
102
Crop Mark
(Align point 2)
Crop Mark
(Base point)