Table of Contents
Advertisement
The system allows the driver to select information by
pushing the following buttons mounted on the steering
wheel:
Instrument Cluster Display Control Buttons
1 — Left Arrow Button
2 — Up Arrow Button
3 — Right Arrow Button
4 — Down Arrow Button
5 — OK Button
Left Arrow Button
•
Push the left
arrow button to return to the main
menu from an info screen or submenu item.
Up Arrow Button
•
Push and release the up
arrow button to scroll
upward through the main menu.
•
Right Arrow Button
Push and release the right
arrow button to
access the information screens or submenu screens
of a main menu item.
Down Arrow Button
•
Push and release the down
arrow button to
scroll downward through the main menu.
OK Button
•
Push the OK button to access/select the informa-
tion screens or submenu screens of a main menu
item. Push and hold the OK button for one second
to reset displayed/selected features that can be
reset.
The instrument cluster display is located in the center
portion of the cluster and consist of multiple sections:
•
Main Screen — The inner ring of the display will illu-
minate in gray under normal conditions, yellow for
non critical warnings, red for critical warnings, and
white for on demand information.
•
Submenu Dots — Whenever there are submenus
available, the position within the submenus is
shown here.
•
Reconfigurable Telltales/Information
•
Gear Selector Status (PRND)
•
Driver Interactive Display (Compass, Temp, Range to
Empty, Trip A, Trip B, Average Fuel Economy, Current
Fuel Economy, Time, Trailer Trip and Gain)
•
All-Wheel Drive (AWD) Status — If Equipped
The instrument cluster display will normally display the
main menu or the screens of a selected feature of the
main menu. The main display area also displays pop-up
messages that consist of approximately 60 possible
warning or information messages. These pop-up mes-
sages fall into several categories:
•
Five Second Stored Messages
When the appropriate conditions occur, this type of
message takes control of the main display area for
five seconds and then returns to the previous
GETTING TO KNOW YOUR INSTRUMENT PANEL
screen. Most of the messages of this type are then
stored (as long as the condition that activated it
remains active) and can be reviewed from the "Mes-
sages" main menu item. Examples of this message
type are "Right Front Turn Signal Lamp Out" and
"Low Tire Pressure."
Unstored Messages
•
This message type is displayed indefinitely or until
the condition that activated the message is cleared.
Examples of this message type are "Turn Signal On"
(if a turn signal is left on) and "Lights On" (if driver
leaves the vehicle with the lights on).
Unstored Messages Until RUN
•
These messages deal primarily with the Remote
Start feature. This message type is displayed until
the ignition is in the RUN state. Examples of this
message type are "Remote Start Canceled - Door
Ajar" and "Press Brake Pedal and Push Button to
Start."
Five Second Unstored Messages
•
When the appropriate conditions occur, this type of
message takes control of the main display area for
five seconds and then returns to the previous
screen. An example of this message type is "Auto-
matic High Beams On."
ENGINE OIL LIFE RESET
Use this QR code to access your digital
experience.
Oil Change Required
Your vehicle is equipped with an engine
oil change indicator system. The "Oil
Change Required" message will display
in the instrument cluster display for five seconds after a
73
3
Scan me
Advertisement
Table of Contents
