Sample Safety Label On The Ont Equipment - Alcatel-Lucent 7302 Information Manual

Description
Laser classification
Laser product compliance
FCC standards compliance
CDRH compliance
Operation conditions
Canadian standard
compliance (modular ONT)
Canadian standard
compliance (outdoor ONT)
CE marking
(2 of 2)
Figure
Safety standards compliance
This section describes the ONT compliance with North American safety standards.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Label text
Class 1 laser product
This laser product conforms to all applicable standards of 21 CFR
1040.10 at date of manufacture.
Tested to comply with FCC standards for home or office use.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This Class A digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus complies with Canadian ICES-003.
There are various CE symbols for CE compliance.
1 shows a sample safety label on the ONT equipment.
Figure 1 Sample safety label on the ONT equipment
FOR HOME OR OFFICE USE
COMMUNICATION SERVICE EQUIPMENT
c US LISTED
®
27FY
Type 3R Enclosure - Rainproof
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil
numerique de la class A est conforme a la norme NMB-003 du Canada
This Assembly Contains Electrostatic Sensitive Devices
ANSI ONT safety guidelines
Tested to Comply
with FCC Standards
CAUTION
November 2013
18533
xxv