Protective Earth; Esd Safety Guidelines; Laser Safety Guidelines; Laser Classification - Alcatel-Lucent 7302 Information Manual

Intelligent services access manager

Hide thumbs Also See for 7302:

Table of Contents

Protective earth

Earthing and bonding of the ONTs must comply with the requirements of local

electrical codes.

The ONT equipment is sensitive to ESD. Operations personnel must observe the

following ESD instructions when they handle the ONT equipment.

During installation and maintenance, service personnel must wear wrist straps to

prevent damage caused by ESD.

Observe the following instructions when you perform installation, operations, and

maintenance tasks on the ONT equipment.

Only qualified service personnel who are extremely familiar with laser radiation

hazards should install or remove the fiber optic cables and units in this system.

Observe the following danger for laser hazard. Eyes can be damaged when they are

exposed to a laser beam. Take necessary precautions before you plug in the optical

The ONT is classified as a Class 1 laser product based on its transmit optical output.

Laser warning labels

The following figures show the labels related to laser product, classification and

Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02

3FE 55873 AAAA TCZZA

ONT Product Information Guide

This equipment is ESD sensitive. Proper ESD protections

should be used when you enter the TELCO Access portion of the

There may be invisible laser radiation at the fiber optic

cable when the cable is removed from the connector. Avoid direct

exposure to the laser beam.

Possibility of equipment damage. Risk of eye damage by

laser radiation.

shows a laser product label.

ETSI ONT safety guidelines

November 2013