SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual page 98

System Configuration
•
•
•
MAC Authentication Table: Displays current entries in the local
MAC database.
CLI Commands for 802.1X Suppicant Configuration – Use the
802.1X supplicant commands to set the Ethernet and WDS user
names and passwords, and to enable the feature.
DUAL OUTDOOR(config)#802.1X supplicant eth_user David
DUAL OUTDOOR(config)#802.1X supplicant eth_password DEF
DUAL OUTDOOR(config)#802.1X supplicant eth
DUAL OUTDOOR(config)#
DUAL OUTDOOR(config)#802.1X supplicant wds_user 1 David
DUAL OUTDOOR(config)#802.1X supplicant wds_password 1 ABC
DUAL OUTDOOR(config)#802.1X supplicant wds 1
DUAL OUTDOOR(config)#
CLI Commands for Local MAC Authentication – Use the
mac-authentication server command from the global
configuration mode to enable local MAC authentication. Set the
default for MAC addresses not in the local table using the
address filter default command, then enter MAC addresses in
the local table using the address filter entry command. To
remove an entry from the table, use the address filter delete
6-22
Permission: Select Allow to permit access or Deny to
block access. If Delete is selected, the specified MAC
address entry is removed from the database.
Update: Enters the specified MAC address and
permission setting into the local database.
7-55
7-55
7-55
7-55
7-55
7-55