Configure; General Commands - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

Command Line Interface
Command
Group
IAPP
VLANs
The access mode shown in the following tables is indicated by
these abbreviations: GC (Global Configuration), IC-E (Ethernet
Interface Configuration), and IC-W (Wireless Interface
Configuration).

General Commands

Command

configure

end
exit
ping
reset
show history Shows the command history buffer
show line
configure
This command activates Global Configuration mode. You must
enter this mode to modify most of the settings on the wireless
bridge. You must also enter Global Configuration mode prior to
enabling the context modes for Interface Configuration. see
"Using the Command Line Interface" on page 7-1
Default Setting
None
7-10
Description
Enables roaming between multi-vendor
access points
Configures VLAN support
Function
Activates global configuration mode
Returns to the previous configuration
mode
Returns to Exec mode, or exits the CLI
Sends ICMP echo request packets to
another node on the network
Restarts the system
Shows the configuration settings for the
console port
Page
7-122
7-123
Mode Page
Exec 7-10
GC, IC 7-11
any 7-11
Exec 7-12
Exec 7-13
Exec 7-14
Exec 7-14