SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual page 103

traffic that has an unknown VLAN ID or no VLAN tag is dropped.
When VLAN support is disabled, the wireless bridge does not tag
traffic passing to the wired network and ignores the VLAN tags on
any received frames.
Note: Before enabling VLANs on the
the connected LAN switch port to accept tagged VLAN packets
with the
wireless bridge
to the
wireless bridge
feature.
Up to 64 VLAN IDs can be mapped to specific wireless clients,
allowing users to remain within the same VLAN as they move
around a campus site. This feature can also be used to control
access to network resources from wireless clients, thereby
improving security.
A VLAN ID (1-4094) is assigned to a client after successful
authentication using IEEE 802.1X and a central RADIUS server.
The user VLAN IDs must be configured on the RADIUS server for
each user authorized to access the network. If a user does not
have a configured VLAN ID, the access point assigns the user to
its own configured native VLAN ID.
When setting up VLAN IDs for each user on the RADIUS server,
be sure to use the RADIUS attributes and values as indicated in
the following table.
Number
64
65
81
's native VLAN ID. Otherwise, connectivity
will be lost when you enable the VLAN
RADIUS Attribute
Tunnel-Type
Tunnel-Medium-Type
Tunnel-Private-Group
Advanced Configuration
, you must configure
wireless bridge
Value
VLAN (13)
802
VLANID
(1 to 4094 in
hexadecimal)
6-27