End; Exit - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

Command Mode
Exec
Example
AP#configure
AP(config)#
Related Commands
end (page 7-11)

end

This command returns to the previous configuration mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration
Example
This example shows how to return to the Configuration mode
from the Interface Configuration mode:
AP(if-ethernet)#end
AP(config)#

exit

This command returns to the Exec mode or exits the
configuration program.
Default Setting
None
Command Mode
Any
General Commands
7-11