Show Snmp; Flash/File Commands - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

show snmp

This command displays the SNMP configuration settings.
Command Mode
Exec
Example
AP#show snmp
SNMP Information
============================================
Service State
Community (ro) : *****
Community (rw) : *****
Location
Contact
Traps
Host Name/IP
Trap Community : *****
=============================================
AP#

Flash/File Commands

These commands are used to manage the system code or
configuration files.
Command
bootfile
copy
delete
dir
: Enable
: WC-19
: Paul
: Enabled
: 10.1.19.23
Function
Specifies the file or image used to start
up the system
Copies a code image or configuration
between flash memory and a FTP/TFTP
server
Deletes a file or code image
Displays a list of files in flash memory
Flash/File Commands
Mode Page
Exec 7-40
Exec 7-41
Exec 7-42
Exec 7-43
7-39